Clare Controls ClareVision Installation Guide download pdf (Page 6)

2 ClareVision Network Video Recorder Installation Guide

Hard disk installation (optional)

Additional SATA hard disks can be installed in your NVR. Disconnect the power

from the NVR before installing a hard disk drive (HDD). A factory recommended

HDD should be used for this installation.

Up to 8 SATA hard disks can be installed on your NVR.

Tools required: Philips head screwdriver.

To install the hard disk drive into the NVR:

1. Remove the cover from the NVR by unfastening the screws on the back and

side panel.

When installing a SATA hard disk drive, we recommend that the installer wear

anti-static gloves and a grounding wrist-strap.

2. Connect one end of the data cable to the motherboard of the NVR and the

other end to the HDD.

3. Connect the power cable to the HDD.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

No comments

Clare Controls ClareVision Installation Guide Page 6